CONSTRUCTION : 
Robust construction pumps are adequately designed with foot-mounted Casing, to accommodate high piping loads and high pressures. Centre line discharged Casing design aids natural venting of vapours from the pump.
Over-designed shaft accommodates high torque & power transmission requirements. Over-sized bearing absorb high radial and axial thrust loads, resulting in minimum vibration & noise levels

Series "MIC" Lined Pumps manufactured by Micro-Mech are built with sound design to offer improved Efficiency and Performance Characteristics. Latest Production Techniques employed help in producing high quality pumps. Each stage of manufacturing programme is carefully designed to ensure world-class Quality, "Reliability" and trouble free operation with least maintenance. State-of-the-Art high pressure lining process, free of adhesive bonding, ensure sound lining areas of metal components provide firm mechanical grip of lining. The lining covers all wetted areas in Casing & Stuffing Box. These parts, with solidly moulded impeller, offer long service life in handling highly corrosive media (pH range; 0 to 14) and temperatures from - 100C to +260C. Variety of lining materials can be offered to handle almost any fluid

• Polypropylene*
• UHMW
• HDPE
• Glass - Fibre Reinforced Polypropylene
• PTFE

* Offered as standard

CASING & STUFFING BOX :

• Cast Iron*
• Carbon Steel 
• Stainless Steel (CF8M), etc.

MATERIALS : 
The "MIC" series pumps are available in the following materials 
IMPELLER : -
Solidly moulded, semi-open impeller with metal insert ensures high strength and durability. The impeller is dynamically balanced as per ISO 1940 to achieve minimum vibration and extended bearing life.
SHAFT : -
As a standard shaft is offered EN-8 Materials. Different materials can be offered on request.
SHAFT SLEEVE : -
Sleeve is a protecting the Shaft from the corrosive media and can be offered in various materials after confirming chemical compatibility.

CASING & STUFFING BOX :
Graded Cast Iron is offered as a standard. Other materials can be offered on request. These components are lined with compatible lining material in all wetted areas.

• Ceramic (99.5% Alumina Oxide) *
• Alloy-20 (CN 7M)
• Hastelloy - C
• Hastelloy - B
• Monel
• Titanium 
• Silicon Carbide

*Offered as a standard.

MECHANICAL SEAL :
As single externally mounted PTFE bellows Mechanical Seal with various face combination is offered after confirming chemical compatibility.

• GFT v/s CERAMIC*
• GFT v/s SILICON
• CARBON v/s CERAMIC 
• CARBON v/s SILICON 
• SILICON v/s SILICON

* Offered as a standard

SEALING :
'O' Ring and Gaskets Sealing are provided in the joints to ensure better sealing even at high pressure.

ACCESSORIES
PRIMING CHAMBER : -
This is specially used for negative suction. It is effective in handling liquids with slurry or particles, as it does not get clogged as easily as the foot valve.
TROLLEY : -
A specially designed, vibration free trolley keeps the pump mobile, whenever required. Further, the trolley can also be provided with FRV coating on the parts exposed to chemical drip.